| |
|
 |
| |
Sellers Name:
Location: ,
Phone Number(s):
|
|
| Ad Place on Dec 31, 1969 // Last Udpated on Dec 31, 1969 |
|
|
|
|
| |
|
|
 |
|
 |
| |
Sellers Name: Brendan Murry
Location: San Jose, CA
Phone Number(s):
(408)266-3324
|
|
| Ad Placed on Feb 01, 2010 // Last Updated on Feb 01, 2010 |
|
_________________________________________________________________________
Complete blown gas 454 Chevrolet-venolia, engle, comp, crower, enderle, RCD, complete ready to run less blower 8900.00
or with blower and injector 12,500.00 ALL NEW!
olsen polished aluminium zoomie covers 40.00
new coated zoomies 525.00 silver or black
Used alcohol birdcatcher -650.00
Billet Alan Johnson big block chevrolet Cylinder heads complete ready to run 6500.00 TI valves, big springs
Trick injector splitter for 6.71/8.71 blower makes 2# of boost!---395.00
Used 14.71 Littlefield mag alcohol/nitro blower, great condition, billet rotors----2000.00
Used 6.7Blower shop billet case alcohol/fuel blower, billet rotors, perfect for nostalgia fuel dragster/funny car, a fuel or aa gas-----2500.00
Used 6.71 Littlefield mini retro blower, billet rotors-------2300.00
Used 12.71 Littlefield alcohol/fuel blower, dow 7 coated, large top & bottom opening---------1800.00
Used 10.71 Mooneyham standard helix 60 degree cast rotor blower 2000.00
Used 14.71 Littelefield magnesium blower for alcohol/nitro, billet rotors, dow 7 coated mag case, fresh---------2800.00
Carbon fibre tall injector new and way bitchin! -------- 3150.00
NEW Blower Shop 6.71 polished blower set up for gas with billet end plates and cover, includes shortsnout ------------$1885.00,
8.71 blower NEW-1850.00 polished
Polished 8.71 Blower Shop billet case blower for gas NEW -------------1980.00
Top screens ----------$12.00
Base gaskets----------- $16.00
Blower studs------- $41.00/set
Billet Fabrication valve covers BB Chevy---------- $355.00
BB Chevy zoomies $385 **<
8mm blower pulleys from $65.00 ea. ,47, 48, 50, 51, 52, 53,54,55,56,57,58, to 70---only 65.00 ea
just got more in stock some new all 65.00ea.
BB Chevy Littelfield manifold w/ports and burst panel machined std opening W/panel -------$585.00
1600 kevlar 8 mm belts ---------179.00-used 125.00B1440 Kevlar blower belts------------ $175.00
8MM Rubber belts1440 ----- $125 .00
BB Chevy Indy cylinder head raised runner blower manifold w/burst & ports machined /installed std deck-New! -----$1150.000
Tall deck 1125bare /with burst panel kit-1250.00
* Mallory Super Mag III new! in the case, Chevy or Chrysler -----$1265.00
**Mallory super mag 3 complete -425.00 with fresh service,complete with new coil and base 426 ./chevy -750.00 fresh!
Brooks rods any length call for volume pricing-798 .per set! many on shelve
polished Kuhl water pump 428.00 KUHL impellers 45.00
Complete small block chevy blower setup 2950.00 blower shop 6-71 With alll drive parts 2900.00 Polished!
big block Chevrolet 6-71 blower shop blower set up street or marine all new POLISHED!-3385.00
* Enderle alcohol bird catcher with all lines nozzles & jets NEW! --$1095.00
** Alcohol bug catcher ------$1025.00 new! *****
* Enderle 110 fuel pump – 13 gallon, coated ----$495..00
* Enderle 80-A pumps – 6.9 gallon, coated--------- $449.00 ***
** -8 three way shut off -------$98.00
** BB Chevy tunnel ram injector – alcohol bird catcher NEW w/pump & shut off $2295.00 *
RCD crank hub-427, 350, 426 & 392 -----$169.00*
* RCD BB Chevy crank support NEW -------$885.00 instock! ** *
SB Chevy blower manifold for big blower 1” taller than stock blower manifold, machined for bust panel & port nozzles, extra sealing around ports --- $635.00
RCD front magneto drive, moves magneteo to front of motor w/all clamps-$975.00
Brooks aluminum rods any length - great rods -----$759.00/set ****
NEW!!! ** ARIAS HEMI CHEVY NEW 2 PUSHROD HEMI CYLINDER HEADS** with trick intake valve train valve covers ect -CALL!!!!
______________________________________________________________________- Blower restraints w/certification $320 -cert, non cert $150 **in stock
SB zoomies cnc machined flanges --------- $295.00
BB Chevy blower manifold w/ports/burst,panel installed new with blower studs and nuts -------- $735.00
* BB Chevy 454 blower hub -----$245.00 /used 125.00
* billet idler pulleys w/tee nut & bolt $135.00 *
BB Chevy idler bracket w/pulley - complete $289.00 *
Blower snouts - used $250 - $325 w / coupler New
I BB Chevy Arias pistons, blown gas 454 + .30, w/ pins $545.00/set
* 12-1 Arias gas pistons 679, /set w/pins,
454 + .30-.125 blown alcohol 11-1-1$689, set w/pins call for low Arias pricing! *
Titan sportsman oil pumps $385.00 - pro billet model $695.00
YOU NEED THE BEST!
Burst panel kits w/panel & cage $135.00
*Bolt on burst panel adapter conversion bolts on front of manifold in place of popoff valve - $150.00 ea
Blower top plate for 850 Holley’s billet and poished aluminium with all hardware $135.00
New, Linkage kits for sideways holly carbs $125.00
** ** Iron 392 heads all race ready $1500.00 pr
–
417 Donovan parts, pistons, cranks, rotating assembly’s call for your special needs
392 idler pulley assembly $269.00
* Polished 392 Donovan valve covers with gaskets and short breathers-950.00
* 392 Crager style blower manifold aluminium with pop off valve new $595.00 or with burst panel kit installed ---------$748.00
417 RCD fully degreed crank hubs $169.00
<
Check out our updated website for more great deals at
WWW.RACECARPARTS.COM
or call (408)266-3324 Brendan VISA/ MASTERCARD UPS SHIPPING EVERYDAY! |
|
|
| |
|
|
 |
|
|
| |
This is Picture 1 of 3 - Click to see more
Sellers Name: Mike Collins
Location: Milwaukie, OR
Phone Number(s):
(503)654-4802
(503)887-8637 |
|
| Ad Placed on Jan 21, 2010 // Last Updated on Jan 25, 2010 |
|
| CASALE 10 DEGREE QUICK CHANGE V-DRIVE: 1inch and 1/8 Shaft. Dogs in good shape. COMPLETE MINUS SHIFTER 1500.00
30 inch solid drive line 16 spline coupler included. 225.00 |
|
|
| |
|
|
|
|
|
| |
Sellers Name: Rick Mills
Location: San Luis Obispo, CA
Phone Number(s):
(636)295-2454
|
|
| Ad Placed on Jan 19, 2010 // Last Updated on Jan 19, 2010 |
|
| Need pistons&rods for 540ci big m chevy blown alcohol. we are running 119cc heads too & I needs lifters for.
We have Vertex Mag Chevy 400$, Layback Rewarder Chrome Headerss for bb chevy 400$, Iron bb Chevy sqaure port heads with new vavle job too 600$ |
|
|
| |
|
|
|
|
|
| |
Sellers Name: Dale I.
Location: Torrance, CA
Phone Number(s):
(310)539-5950
|
|
| Ad Placed on Dec 03, 2009 // Last Updated on Feb 02, 2010 |
|
Enderle Fuel Systems:
New: Enderle's Tall Dragster hat, aka "Big and Ugly". All new polished aluminum casting with billet 3-butterfly (5 9/16" or 5") assembly. In stock now, $1295, butters, stops and levers only, $1895 complete w/K-Barrell Valve, lines nozzles, etc. New: Buzzard Alky w/"K" Barrell Valve $1549, Bird Catchers Alky $1175, Gas $1255, Bugcatchers Alky $995, Polished 3" Injector Spacers $95, Fuel Pumps (Coated) 80A $455, 110 $515, 990 $615, 1100 $635, 1200 $675, 1270 $695, Shut-off valves: -6 $85, -8 $105, 3"-6" fuel pump Drives $129, new Alky "K" Barrell Valve $245, shut-off cable bracket $30, new Aluminum Nozzle Bodies set of 8 $58, New 8-port distribution blocks $53, -8 port check valve $49, -6 Idle check valve and HiSpeed CV $38, Quick Release fuel pump SS clamps $39, QR Fuel Pump Plates $25, jets, pills, hi-speeds, port kits, pill & nozzle storage blocks $20ea, all parts, etc., New BBC or SBC Front Timing Cover $95, Dual Carb Throttle Linkage Kits Tunnel Rams $95, Dual Carb Throttle linkage for Blowers side-mount $95
Other Fuel Delivery Stuff:
JT Stewart/Jackson Top Fuel Barrel Valves, dual inlet, screw idle flow adjust cost $1100 sell $675, BNR fuel mgt 4-stage timers/logic/manifolds $450, Like new, 3 passes Enderle 110 pump $350, Used Alum Buzzard with Alky k-Barrell Valve $950
RCD Engineering:
Nice like-new front drive Mag/Fuel pump $695, BBC 427 or Mopar 426 crank hub w/degree wheel $185, BBC 454 Hub w/degree wheel $275, 13.9mm-75 Belt $168, 14mm 1568-75 Belt $195, 8mm-1440 GT2 kevlar belt $155, New 8mm-1600 GT2 Kevlar belt $195, 8mm/13.9/14mm Pulleys, Idler Pulleys, Gear Drives, Blower Snouts, 426 Mag Drive hold down $65, Stroker plates bolts to top pulley w/1/2" drive $32,
Ignition:
Cirello Buzz Box $75, MSD ProMag 44 CCW generator $1300, MSD Points Box w/Rev Limiter #8147 $400, MSD ProMag Red Coil $300, PSI rev limiters (for Mallory Super mags) $350-450, Mallory SuperMag Generators: Cirello 7.6AMP Nitro $625, SM III $350, Sprint Mag with Big Cap, like new $275, Power Coil #8201 $65, Mallory Magneto parts (New Pro Caps $30, Stainless Mag Clamps $30-45, Adaptors, Mallory red Transformers $95, blk transformers $125, Rotors $15, 4-prong & Dunn/clover drives)
Magneto Drives:
Dunn 6" BBC/SBC offset drive used $450, Dunn 4" offset Drive used $400, BBC Greer BBC/SBC offset mag drive 3 9/16" new for std deck $525, used $400, for tall deck $525, 6.5" Greer offset drive new for std deck BBC/SBC $595, New Sitko 426 hemi single offset with .75" shaft $975, Sitko Dual offset Mag Drive new: $1250, used $750, nice new 426 hemi single Mag Drives w/bronze gear and oil pump drive $310, Enderle dual offset Mag drive 426 $350
Blowers:
Polished Littlefield tall deck BBC Blower Manifold with Port line kit $650, Indy BBC Blower Manifold, polished std Deck, Burst Panel $750, Stroker Plate (bolts to top pulley/snout) to manually turn engine 1/2" receiver for Ratchet $30, 14-71 Mooneyham backgear billet rotor std helix, w/snout $1500, Polished RC 8-71, hard anodized rotors, fresh rebuild $1400, Bowers Magnes. 10-71, fresh rebuild $1250, Polished 6-71 w/drives fresh rebuilds $1,250, Polished BBC Mooneyham tall deck blower Manifold w/Lee Perf Innercooler $1650, New Indy Blower Manifold Big Chief 10.2" deck $950, Polished Mooneyham blower manifold tall deck $300, New BDS BBC Idler bracket Assy $125, New Blower Snouts 4" $275, 5" $295, 6" $325, 7" $350, Blower alum. studs/nuts $48 set, Pressure Relief Valve for Blower $14, Burst Panel Kits (SFI Panel, cage, hardware) $75,
Pulleys/Belts:
New 1568-84 14mmgt Carbon belts $200, New Kevlar 8mmGT 1600 belts $185, 2-5 run belts $60, New 1440 Kevlar Belt $155, New 13.9mm Belt $165, New 14mm 1568 GT Belt $175, used 1568 GT Belt $50, Used 1610 Belt 14mm $70
8mm Pulleys: 43, 45GT, 47GT, 48, 49, 50GT, 50, 51GT, 51, 52, 53, 53GT, 54GT, 55, 56, 56GT, 57, 58, 60GT, 61, 62GT, 63GT, 63, 64GT, 65, 67GT, 67, 68GT, 68, 69GT, 70, 71GT, 72GT, 73GT, 13.9m Pulleys: 26, 27, 29, 33, 34, 44, 14mm Pulleys: 24, 25GT, 26, 27GT, 27, 29GT, 28, 31, 31GT, 32, 33, 36, 41, 42, 42GT, 43, 44, 45, 54GT, 1/2" pitch pulleys: N/A Pulley Spacers .30"/.50"/.70"/1.00" $24-30ea
****New SFI Burst Panels $25ea, three for $60*****
V-Drives:
Casale 12-deg Split case V-drive, w/ in/out, no gears, $750
Casale Gearsets (BUY, SELL, EXCHANGE):< 10-deg.: 1.12, 12RH, 18, 29, 32, 35, 40, 45, 48, 50, 54, 57, 60, 63, 70, 73, Casale Gearsets 10-deg Large Top Shaft 2.31, 2.33, 2.40, 2.50, 2.57, Casale Gearsets 12-deg.: 1.12, 15, 18, 45, Shaft/Gear spacers $15ea,
New Billet in/out housings $175, Pneumatic 5-way Toggle Valve for Air shifter ($40 new), Electric over CO2 valve 5-way for V-drive $55
Clutches, Transmissions, Driveline, Underwater:
Lenco 15 disc clutch, heavy duty, ready to run $1350, Owens multi-sprag 30% 2-speed trans $1100, Polished aluminum Shaft log seal housing for 1.375" shaft, Barber Strut 1.5" $200, New Owens BBC Bell Housing $320 (works w/Owens/Lenco/B&J), used Lenco 426 hemi Bell housings $200, Solenoid/Valves 200PSI for Clutch or Trans activation $150, Lenco Servos $70, 426 hemi 40, 35 spline crank buttons, New Hemi or BBC 35 Spline Crank button, $120, used BBC 35 spline button $80, 32 spline Drive Shafts 5.75", 5", Prop Shaft, 1.25" to 1.375" $65, 1" prop shaft Coupler $85, 1.375" PS Coupler $30, 1.25", 1.125" PS safety collars $20ea, 1" safety collars $15, Clippard
Hondo/Menkens Forged 1-piece forged Propellers:
Prices are going up in 2010. Get your TFH Counter rotating Props @ 2009 prices: $5000 pair. These are the same design propellers that propelled the Problem Child TFH to unprecedented (and consistent) ETs and 260mph+ and 4.5 second ETs. Wish we had these in 2007 (I might still be racing!), Limited time only, have 3 sets on the shelf.
New Technology, race proven by many of the top TFH, TAH's and TAF's! LH and RH props available, also new Polygon design shafts, Call Direct: James Brendel/Hondo Extreme (925) 325-4967.
Hydro Props (1.0 shaft"): Menkens 11.5x17
Hydro Props (1.125"): Menkens 11.250x17
Hydro Prop (1.375" shaft): 1.375 11.25x16 Menkens
Hydro Prop (1.5" shaft): 11.25x15 Kindsvater
Safety:
DJ Safety Top Fuel Dragster or Funny Car Chutes new $300, DJ Coldfire 10 lb bottle $250 new, Lifeline Chute Jacket Blue Large needs recert blue $350, Lifeline helmet restraint $75, Aluminum breathing bottle bracket $50, Phoenix 10lb Fire Bottles w/ Diest billet mounts $125, Like new Lifeline Ballistic shorts, black 42, $125, New Oakley Hitop Driving shoes SFI 3.3/5 red sz 8, 11.5, $85, Lifeline Chute Jacket w/bag (needs recert), Black, small $325
Other Stuff:
Donovan Billet SBC Gear Drive nice, $400, Dennis Taylor Engine Cover $40, Polished Bird to 14*71 Adapter $85, Donovan BBC Gear Drive $300, 36 Volt Crank starter $700, RCD crank starter bracket assemby KB/BAE 426 $350, Spark Plug Gapper Tool, simple easy to use tool $50, Olson BAE/KB Vdrive Hydro Pan $425, ORA Valve adjust tool $65, Olson BAE/KB oil pan $375, Leak-down tester $50, Small Block Chevy V-drive flywheel-forward Oil Pan 8-9 qt w/pickup $130, Moroso 22285 Omni filter new $129, Dooley 10 qt BBC pan or Flywheel aft vdrive or Jet Boat $150, New System 1 oil filter $140, nice used 6" $95, 4" $50, Honda XR70 $875, Polished shaft log $60, 426 valve cover plugs (when going from dual to single Mag) $115 set, Plugs for Spark Plug Hole (in-head) $28 set of 8
|
|
|
| |
|
|
|
|
|
| |
Sellers Name: Dan Aaseth
Location: Newhall, CA
Phone Number(s):
(661)510-6362
|
|
| Ad Placed on Dec 01, 2009 // Last Updated on Dec 04, 2009 |
|
BOAT INSTALLATION HARDWARE:
Fiberglass Seats NEW Original 2 Rib Design White or Black Gelcoat std size 18 1/2" wide $85 ea...wide boy size 20 1/2" wide $110 ea, Carbon Fiber Seats NEW hand laid $275 ea, Fiberglass Air Scoops Tall Formula 5000 Look NEW Seam filled, primed, ready for Paint $135, Upholstered Velcro Scoop Intake Covers $15, Billet Aluminum Seat Mounting Brackets (stringer mount) NEW $35 pair, Billet Aluminum V-Drive Plate Brace Recievers for Hiem Joint Braces NEW (nice window milled and angle cut pieces) $120 pair, S.S. Hiem Rod Ends $26ea, Alloy Hiem Rod Ends $7.50ea, Billet Aluminum V-Drive Plate Brackets NEW T style and radiused (no holes) $40 pair, Billet Aluminum Engine Mounting Rail kits NEW 75" long with 10 Stringer Washers $95, Billet Aluminum Motor Plates NEW 3/8" 6061 T-6 Our pattern or copy yours $350 set, Billet Aluminum Machined 2" wide Motor Plate Feet set of 4 machine finish $85 or polished $95, Stringer Washers Billet NEW Machined Finish .60ea, Anodized Colors (Red, Black, Blue, Purple and Gold) $1.20 ea, Billet Aluminum Flatbottom Fins New $75, Flatbottom Rudders 100% Chromoly 1" shaft NEW Our own Canyon style River Race to Top Alcohol $450, Chromoly Chrome Wedge Rudder 1 1/8" shaft 12" tall NEW $450, Chrome Rudder Stuffing Boxes $85, Double Seal Chrome Rudder Stuffing Boxes $90, Billet Aluminum Rudder Braces NEW $40 ea, Rudder Shaft Collars $10 ea, Propshaft Safety Collars 1" & 1 1/8" Chrome 2 piece NEW $20 ea, Down Pedal Control Rod Clevis Ends NEW $20, Billet Polished Control Arms $80, Billet Polished Transom Cavitation Shaft Bearings $39 each, Cav Plate Polished Reciever Pads Bushed Billet NEW $37.50ea, S. S. Polished Eyelevers 1 1/2" to 2 1/4" $20 each, Turn buckle Centers 1/2" dia Aluminum 5" and 6" long NEW $12 ea, Starter Switches Heavy Duty Foot Buttons $25 ea, Strut Bushings 1", 1 1/8" and 1 1/4" $20
Ask for pictures of anything listed
MSD Pro Mag Ignition:
MSD Coil NEW in sealed box p/n 8142 $540 (Jegs $600)
MSD Hemi Dual Plug Wire Set NEW in sealed box p/n 31559 $230 (Jegs $255)
BBC ENGINE PARTS:
Bellhousing Flywheel Covers NEW Polished Aluminum $175 ea, Bellhousing-Driveline Guard 5" Adapter Ring NEW Polished $60, Alternator Mounts NEW Polished $100, Alternator Kits 80 amp Chrome with Polished Rex Low Mounting kit $200, PTO (Power Take Off Button) kits with all Bolts NEW Flywheel or Flexplate 1310-$55, 1350- $60, CM Hi Volume Oil Pumps 1.400 wide rotors NEW $60 each
CHRYSLER ENGINE PARTS:
SCE Head Gaskets 4.380 Bore Brad V Fathead New in sealed packages
Part# 063386 .060 $110
Part# 063387 .070 $120
Part# 063388 .080 $130
Part# 063389 .090 $140
C & A Bearings main and rod in stk call, Flywheel spacers 1/2" $20, Crank Button 35 spline $75, RCD slotted idler pully adjuster magnesium $30
JET HARDWARE:
BBF Panther Exhaust Manifolds and Risers $200, 1310 U Joints NEW $13.75ea, 1350 U Joints NEW $18.95ea
CASALE V-DRIVE HARDWARE:
V-Drive Mounting Plates 3/8" and 1/2" thick Water Jacket or Large Gear cutout NEW 6061-T6 in stock, Prop Shaft Couplers (steel & balanced) NEW in stock, Whirlaway kits NEW in stock, Whirlaway Dog sets NEW $450 set, Air Shift kits complete with Co2 Bottle, Regulator and Electric Air Valve NEW $395, Air Shift Bracket NEW $75, Electric Air Valve $60, Bimba Air Shift Cylinders NEW $50, Shafts in stock, Gasket sets in stock, Bearing pullers $55, Bearing sets in stock, Locking Handles NEW in stock, Output Housings NEW in stock, Input Hub Flanges 1310 and 1350 NEW in stock
Canyon Marine is an authorized Casale V-Drive repair station. Call Canyon Marine at 661 510-6362 and ask for Dan. We have a full inventory of new Casale parts, Thanks
DRIVELINE HARDWARE:
Male Greek Coupler 16 spline $50, Driveline Sleeve Coupler 1 3/8" 16 spline $60
MISC:
Ultimate Engine Stands as seen in National Dragster used by some of the top teams in NHRA featuring dual roller bearing head, powder coated frame, 4" urethane wheels, solid steel arms...holds a complete blown motor with ease, NEW in Stock $459.95 www.cmproductsstands.com
System One -10 Fuel Filter New in Box $100, Kurtis Lexan Polycarbonite Capsule Windshields NEW SFI approved $1100, Heavy Duty Prop Pullers $80, Co2 Bottles 2 1/2 lb NEW $85, Co2 Bottles 10 oz NEW $75, Co2 Fixed Regulators 100 lb, 120 lb, 150 lb, 175 lb, 180 lb and 225 lb NEW $40, Co2 Download 20lb NEW Aluminum Fill Bottles (for filling smaller sizes) $175, Download Transfer Manifold $50, Aircraft Starter Solenoids NEW $30, Polished GSM Kurtis 1 1/4" Propshaft Log Housing NEW $150, Polycarbonite Propshaft Shaftlog Seal Housings 1", 1 1/8", 1 1/4" NEW in stock includes seal, snap ring and zert $60
Thank You
Dan Aaseth
Canyon Marine
(661) 510-6362
Email..liquiddan@ca.rr.com
 |
|
|
| |
|
|
|
|
|
|
|
